Center Guiding System
Center Guiding System
Center guiding application may involve either fixed or moving sensor system. The guide system keeps the center line of the web in an exact position. In case of Moving sensor center guiding, the sensors continuously reposition themselves automatically to detect both web edges and maintain the center line irrespective of any width variation.
Guiding Solutions
We can guide thinnest Plastic film to the thickest Metal strip, from the Narrowest Web to Widest web through our Wide range and Versatile Technology. We have achieved success in Heavy load application Web Guiding Control as well.
Web Guiding Components
Sensor
- HIGHER SENSING ACCURACY OF 0.01 MM
- OM SUNTRONICS has range of sensors which can accommodate Edge Guiding, Line / Edge Guiding, Centre Guiding (Fixed and Moving). Sensor selection depends upon types of material and type of environment.
- Apart from its range of sensors. OM SUNTRONICS is able to develop a tailored made sensor to meet requirement of special customer application.
- Sensors are designed & manufactured with utmost care to avoid interference of external noise and ambient light.
- Ensures immunity from Dust and Contaminants.
Controller
- Versatile Range of Controllers to accommodate almost any web material.
- Wide Range of Controllers is designed according to Web Process Application and Equipment Speed
- All OM SUNTRONICS Guiding Controllers are equipped with Advanced Superior Technology. Controllers Offer Reliable Life for years of operation.
- Advanced Digital Controllers are equipped with Highly Advanced Micro Controllers which gives very High Response to the Error Signal Processing even at Higher speeds upto 800 m/min.
- Controllers are designed to give proportionate correction to Actuators & response gain enhances as web speed increases.
Actuator
- Highest Response to Controller Signal
- Wide Range of Actuators depends upon the type of application, load requirement and type of environment
- Available for Load Ranges from 10 kg to 10 Tonnes
- Various Actuator design available for Stroke Length 25 mm To 300 mm as a Standard
- Correction Speed ranges from 10 mm to 60 mm per Second as a Standard
- Customized Actuator can be designed according to Specific Requirement
